Ricoh PCL6 Driver Informacje Techniczne Pobierz pdf (Strona 51)

Printer Driver for Universal Print ver 4.5.0

Page 51 of 134

5-1-4. Scripting

We support the installation of the Printer Driver for Universal Print via scripting. This section shows a

sample installation of the Printer Driver for Universal Print by using commands.

The following command will:

 Create a queue called “Ricoh Printer”.

 Use oemsetup.inf to install the driver.

 Assign the port “LPT1:” to the queue.

Sample:

rundll32 printui.dll,PrintUIEntry /if /b “Ricoh Printer” /f oemsetup.inf /r “LPT1:” /m “PCL6 Driver

for Universal Print”

For information about the usage of this command, type:

rundll32 printui.dll,PrintUIEntry /?

5-1-5. Manual Installation

The Printer Driver for Universal Print does not support USB Plug and Play installation, but manual

installation is available.

Windows 7, Windows 8, Windows 8.1, Windows Server 2008 R2, Windows Server 2012 and Windows

Server 2012 R2

1. Log on to Windows as an administrator.

2. Close any open applications.

3. Connect the device to a computer by using a USB cable and then power on the device.

4. Automatic installation of the device driver will appear to start and then fail, displaying the

message “Device driver software was not successfully installed”. Close this message.

5. Open Device Manager.

6. The device should be listed under “Other devices”. Right-click the device and select “Update

Device Software…”.

7. When the “Update Device Software" screen is displayed, select “Browse my computer for

driver software”.

8. Browse to the folder that contains the driver files (typically an extracted archive downloaded

from the website) and click OK.

9. Follow the rest of the wizard’s instructions to complete the installation.

PCL PS

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 133 134

Brak uwag

Ricoh PCL6 Driver Informacje Techniczne Strona 51